Advanced Grinding Supplies Ltd Logo page header

Home Contact us News Newsletter Info request          
                   
Studer Schaudt Mikrosa Combitec Losma Bruckner Dressing Tools Filter Paper Abrasives Tooling &
Accessories
 

Would you like some some more information?

Why not use our on-line information request form.
 


Would you like to receive our newsletter?
 

Can't find what you are looking for? Try our website search...
 
 
 
Coolant Filter Paper
Picture of Coolant filter paper rolls
Coolant filter fabric rolls are used on many machine tools fitted with continuous band coolant filter systems like the Losma Detex, Decom and Spring units. The filter fabric lies onto a continuous band and the contaminated coolant comes out of the machine onto the filter media. This contaminated coolant then filters through the fabric back into the clean coolant tank.

The filtered contaminant builds up a 'cake' on the filter fabric which as well as increasing the filtration efficiency it also slows the speed at which the coolant passes through causing the coolant level to rise. This then triggers a float switch to index the filter roll along to expose a section of clean filter fabric.

We stock a large range of standard width fabric rolls in lengths of 100m and 200m with nominal filtration capacities of between 10 and 50 microns. The standard widths shown below fit straight onto most coolant systems which use this method of filtration. If however your system takes a different size then we can also cut rolls to any size required*
 
Type Weight
(gr/m2)
Filter
capacity
(m)
Standard rolls of 100m and 200m available in the following widths (mm)
PL. 20 20 50 500 530 700 730 1000 1030 1400 1430
PL. 25 25 45 500 530 700 730 1000 1030 1400 1430
PL. 35 35 35 500 530 700 730 1000 1030 1400 1430
PL. 50 50 20 500 530 700 730 1000 1030 1400 1430
PL. 70 70 10 500 530 700 730 1000 1030 1400 1430
                     
TX. 20 20 50 500 530 700 730 1000 1030 1400 1430
TX. 25 25 45 500 530 700 730 1000 1030 1400 1430
TX. 35 35 35 500 530 700 730 1000 1030 1400 1430
TX. 50 50 20 500 530 700 730 1000 1030 1400 1430
TX. 70 70 10 500 530 700 730 1000 1030 1400 1430


*
Special sizes available on request, subject to minimum order quantities


If you would like more information on our filter rolls you can contact us directly or you can use our on-line information request form and we will be happy to answer any questions you might have.
 

 

 

  Bookmark and Share

 
Advanced Grinding Supplies Ltd. 2009. All rights reserved

Registered office: SWJ House, Goodridge Business Park, Goodridge Avenue, Gloucester, GL2 5EB
Tel:
0845 053 0340   Fax: 0845 053 0341   E-mail: info@adgrind.com
R
egistered in England. Registration No: 5976793

Site map
Contact us
Privacy policy