 |
|
Studer type Chisel Dressing Tool
Studer type chisel dressing tool.
Our standard stocked dressing tool has a 0.50 carat High Quality Natural Maccle
Diamond, with a 55 degree chisel angle. The most common and
stocked lapped
radius sizes are 0.125mm, 0.250mm or 0.500mm.
To fit onto your
Studer machine the tools are mounted on a short MT1 shank.
These tools are serviceable and we offer a full re-lap /
regrind service. |
|
 |
| Studer type CVD Log
Fliese Dressing Tool
Studer type CVD (Chemical
Vapour Deposit)
log Fliese dressing tool. This has a CVD log set on centre
and has either a 0.125mm or
0.250mm lapped radius. Log size 3mm x 1mm x 6mm.
These
tools are serviceable and we offer a full re-lap / regrind
service. |
Studer type CVD
log Fliese dressing tool. This has a CVD log set on centre with a 0.500mm lapped radius.
Log size 3mm x 3mm x 2mm.These tools are serviceable and
we offer a full re-lap / regrind service. |
|
 |
|
Studer type Cone Dressing Tool
(with extraction thread)
Studer type Cone dressing tool.
Our standard stocked dressing tool has a high quality 1/4 carat Natural, Long
Diamond with a 60 degree Cone point. The standard tools come with 0.125mm, 0.250mm, 0.400mm or
0.500mm radius mounted on short MT1 shank with extraction thread
to fit straight onto your Studer machine.
These tools are serviceable and we
offer a full re-lap / regrind service. We can also make these
tools using various diamond carat sizes if required.
|
|
 |
|
Studer type 3 CVD Log Fliese Blade Dressing
Tool Studer type
3 CVD (Chemical Vapour Deposit) log Fliese blade dressing
tool has a 10mm wide Fliese
blade with 3 CVD logs 0.8mm x 0.8mm x 5mm equi-spaced and positioned on
centre with a 0.25mm lapped radius. The tool is mounted on
a short MT1 shank to fit straight onto your Studer
cylindrical grinding machine. These tools are serviceable
and we offer a full re-lap / regrind service. |
|
 |
|
Studer type 3 CVD Log Fliese Blade
Dressing Tool (with extraction thread)
Studer type 3 CVD (Chemical Vapour
Deposit) log Fliese blade dressing tool has a 10mm wide Fliese
blade with 3 CVD logs 0.8mm x 0.8mm x 5mm equi-spaced and positioned on
centre. The CVD inserts can be positioned in a square or
diamond formation to meet requirements.
The tool is mounted on a short MT1 shank with
extraction thread to fit straight onto your Studer cylindrical
grinding machine. |
|
 |
|
Studer type Needle / Grain Fliese Blade
Dressing Tool
Studer type Fliese blade
dressing tools can come with either high quality natural
diamond needles or natural diamond grains and standard tools
have either 10mm or 15mm wide Fliese Blade with 10mm or 15mm depth of
diamond mesh.
We keep a stock of various types
and sizes but we can also manufacture this style of tool to
suit individual requirements.
Our standard tools are mounted on a short MT1 shank to fit onto your
Studer cylindrical grinding machine |
|
